How To Plant Weed Seeds In Rockwool Cubes

ILGM

Buy Cannabis Seeds Online

In this post we focus on explain the functioning of a hydroponic crop with rock-wool, pointing out the different steps to follow to get a successful c Germinating seeds in rockwool cubes will be a great process for your plant’s growing experience. Rockwool is a soil-free medium or substrate used for starting seeds SSSC’s Cannabis Seeds Germination Guide: In this article we will try and give you an overview over the different germination methods used for cannabis seeds and then tell you our preferred way of

Growing cannabis in Rockwool

Rockwool is a product that was first conceived during the 20th century in Hawaii by observing natural volcanic action there. Upon this discovery, a Danish company named Rockwool began to investigate and develop ways to commercialise this technique, and in the late 1930’s released the first standardised stone wool product as we know it today.

To manufacture Rockwool, the raw material of basalt rock must go through several industrial processes, the first of which is melting of the rock in furnaces at extreme temperatures, up to 1600ºC, emulating the action of a volcano and leaving the rock in a natural state of liquid lava.

To obtain the fibres, an organic binder is added to the lava and the mixture is subjected to a mechanical process using centrifugal force, resulting in something resembling a woollen mattress. This wool is then compressed to varying degrees, the density and amount of air between the fibres depending on the projected end use, whether for acoustic or thermal insulation, fire-protection and, of course for it’s use in agriculture.

2. How to stabilise Rockwool

Rockwool Cubes and Slabs

Rockwool substrate is a product that needs to be treated before it’s use. Given that its initial pH level is quite alkaline, nearly 7 points, we should stabilize it to enable us to grow without mishaps from the very beginning.

We must immerse the slabs for 24 hours in a nutrient solution that contains a pH level of 4.5 with EC levels of 0.5-0.6 – ideal to start growing with seeds without worrying about nutrient deficiencies.

When we start to grow the pH level of the slabs should be at 5.5, if that isn’t the case, we should immerse them again during a few more hours checking the pH regularly until it is stabilised. An easy way to know if the pH of the slab is stabilised is to irrigate with water of 5.5 pH and measure the run-off with a pH meter. If the run-off is at 5.5 we can proceed to plant the seeds.

3. How to germinate cannabis seeds in Rockwool

Germination in rockwool

Once the Rockwool cubes have a stable pH as described above, we can proceed with the germination of the seeds we intend to use in our grow.

We will start the germination in two wet paper towels, placed between two dishes in order to maintain a constant humidity and facilitate the germination of the cannabis seeds. Once we see that the seed casing has cracked open and the root appears, we can very carefully transplant them into the stabilised Rockwool cubes and, once established, we can perform the transplant to the slabs.

To transplant the seedlings, we insert the small 3 x 3cm cubes into the 7.5 x 7.5cm Rockwool blocks taped to the slabs. As we do this, we must push gently and slowly until the small cube is well inserted into the larger block, taking great care not to break or damage any roots in the process.

4. How to root cuttings in Rockwool

The process of rooting cuttings in Rockwool is very similar to other cloning methods using jiffies or coco-coir (see how to take cuttings).

After the process of preparing the cuttings for cloning them, we place them in the Rockwool cubes (previously stabilised to pH 5.5) which should be moistened but not soaking wet, to avoid any problems with stems rotting.

Once the cuttings are placed in the cubes we can treat them exactly as if they were in jiffies or coco, monitoring the humidity every day and spraying the cubes to keep a constant moisture on them to ease the rooting. As time goes by it will be necessary to lower the relative humidity until we can finally remove the cover of the mini-greenhouse and start to acclimatise the cuttings so that they don’t suffer when transplanted.

Cuttings in Rockwool cubes

5. How to grow in Rockwool

As previously outlined, the growing medium must be stabilized at pH 5.5 with an initial EC of 0.5-0.6 during this first week of growth, not exceeding two waterings of 1 minute each, with a solution of around 60-70 ml per plant. In this way we will avoid water-logging and facilitate the root growth of plants in this highly absorbent and water-retentive substrate.

To ease the task of watering, using an automatic irrigation system will help enormously and is simple to assemble and use, as you can read in our post on how to install a hydroponic system.

We can maintain this irrigation schedule, varying according to conditions and demand, until the first week of flowering when we will start to gradually increase pH from the initial level of 5.5 , raising it slowly over the course of the week to a level of 5.8-5.9 suitable for this stage of flowering.

Hydroponic crop in Rockwool

From the second until the end of the third week of flowering, we will need to increase the frequency and duration of the irrigations, watering three times a day. The first watering should be of 2 minutes duration when the lights turn on, ensuring the plants start the day with energy. The second watering should be six hours later and 1 minute in duration, with an EC of 0.8-0.9 and a pH of 6.0.

Over the 4th week and until the end of the 5th week of flowering we will again have to increase the frequency of irrigation to 4 waterings at day. The first and the last irrigation should each last 2 minutes, and the remaining two waterings should be 1 minute, distributed evenly through the day. EC levels should remain at 1.0 to 1.2, always taking into account the condition of the plants. We should keep the pH at 6.0 allowing it to fluctuate up to 6.2 to lower it again to 6.0 with pH down.

See also  Do Weed Seeds Have Thc

During the 6th week of flowering it will once again be necessary to increase the frequency of waterings from 4 to 6 per day. The first and last irrigation should last 2 minutes each and the four remaining waterings will each be 1 minute. The EC should still be at 1.4 and the pH continues fluctuating between 6.0 to 6.2 as in the previous week.

In the 7th week of flowering period we will have to keep the same frequency and duration of irrigations; however, in this week, depending on the condition of the plants, we can increase the EC from 1.4 up to 1.6-1.7 and we can also let the pH fluctuate from 6.0 up to 6.3.

In the 8th week of flowering, plants will receive the same number of irrigations, at the same duration as in the previous week, although we can raise the EC to 1.8 depending on the condition of the plants.

In the 9th and last week of flowering phase we will have to increase the duration of all the waterings to 2 minutes, with the pH adjusted to 6.2 and with EC levels as low as possible. We can take advantage of this last week to apply a flush product to help us wash the roots, leaving the plants’ metabolism free of any remaining salts and nutrients and ensuring a far better, cleaner aroma and flavour in the end product.

Hydroponic cannabis grow using Rockwool

6. Recycling Rockwool

Rockwool can be a complicated product to dispose of, given that it isn’t biodegradable. However, today the technology is available to recycle surplus and used material and help to avoid the potential contamination caused by sending it to landfill sites.

The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.

Germinating Seeds In Rockwool Cubes

Germinating seeds in rockwool cubes will be a great process for your plant’s growing experience. Rockwool is a soil-free medium or substrate used for starting seeds. They can as well be used in hydroponics or stem rooting.

Rockwool offers so many benefits in almost any type of plant which makes it popular and best-loved among most growers.

This article attempts to enlighten you on germinating seeds in rockwool cubes and more, so read on to learn.

Table of Contents

Please enable JavaScript

Rockwool are made from spinning chalk and basalt rock which are formed into a thick mat of natural fibers. The combinations are made to look like the consistency of cotton candy. The spun fibers are then combined with a binding agent. The materials are pressed and formed into cubes which we know as rockwool cubes. Mostly, rockwool cubes can come in one or two inches sizes: although, you can also obtain bigger rockwool cubes of about four inches.

The smallest rockwool sizes are the most appropriate for starting seeds, leaf cuttings, and stem propagation. Bigger rockwool cubes are mainly used to grow denser plants.

Guide On Germinating Seeds In Rockwool Cubes

Seed germination requirements can sometimes demand careful and precise planning or process. Take for instance moisture requirements: moisture is an essential factor when it comes to seed germination.

Therefore, rockwool cube is a great choice to use in germinating seeds because rockwool cube has the ability to retain moisture. Rockwool cubes will keep your seeds moist at the same time preventing your seeds from sitting in a waterlogged environment. They can retain just the right amount of water to keep your seeds from drying out thereby improving the germination of your seeds.

How To Start Seeds In Rockwool

  • The first step to take in germinating seeds in rockwool cubes is the preparation of the rockwool cubes. Rockwool cubes need to be soaked in pH adjusted reverse osmosis water before use. They don’t require too much soaking; however, ensure the cubes are fully absorbed in water.
  • Soaking is required because rockwool cubes usually have a high pH of about 7.8 but your seeds will require a pH of 5.5 which is a slightly acidic medium. This way, your seeds will have an optimal chance of germinating and sprouting appropriately.
  • Remove the rockwool cubes from the soaked water and give them a gentle shake to take off excess water. However, don’t squeeze them. Now your cubes are ready to be seated in your germinating tray.
  • Most rockwool cubes have holes in them, so get your seeds and drop them into the holes of the rockwool seeds. With a toothpick or other identical objects, gently bring down the seeds to the bottom holes.
  • Now squeeze the rockwool hole to close them or simply break off a little piece of the rockwool from the sides to cover the top. The seeds need to be placed in a dark environment.
  • Now cover with a humidity dome so that they can maintain a humid environment. Keep them at 70 to 80 degrees. Now you can place them in a gentle grow light.
  • You can maintain a moist environment by misting with a spray bottle whenever you notice them drying out. Sprouting should be noticed after a couple of days.
  • When the plantlets are about 2 to 3 inches, they are ready to be transplanted into your hydroponics or traditional soil.

Benefits Of Start Seeds In Rockwool

  • Water Retention: rockwool cubes have an excellent water retention property which is very essential for the germination of your seeds. At the same time, rockwool will not waterlog your system. It has the ability to drain excess water, retaining just the right amount of water needed by your seeds to germinate.
  • Air Circulation: rockwool cubes will provide good air circulation and oxygenation of the root system.
  • Clean: rockwool is a clean or sterile medium and it doesn’t have any weeds, pathogens, or pests.
  • Reusable: rockwool cubes doesn’t decompose over time. Therefore, it can be reused over again.
  • Safe: they are made from natural materials. Thus, it is very safe to use for your germinating seeds because it doesn’t contain any toxic substances.
See also  Hydroponic Weed Seeds

Why won’t my seeds germinate in rockwool?

The problem might be that they are not getting enough light. Rockwool is a great product for growing plants and it has been used for centuries. It’s made from ground-up volcanic rock so it provides nutrients and structure for plants to grow. It also helps maintain moisture in the growing medium. There are many different types of rockwool, each with its own unique properties.

Rockwool is like a sponge and absorbs all moisture from the air. It’s great for storing seeds but if you put them in it they won’t get a chance to germinate. You need to keep your seed starting containers dry and make sure you water the soil before you cover the seeds with the rockwool. I would use vermiculite for a seed starting medium because it’s a bit drier than the rockwool.

Do seedlings need nutrients in rockwool?

As long as they are not sitting in wet rockwool, yes. If you do not want to water them, use a bulb planter and keep them in a shaded area. If you’re going to be transplanting them to larger containers, you can add some nutrients to the potting mix if you want to. If you have the fertilizer that comes with the plant, that will be fine. You could also use a diluted liquid fertilizer such as a 10-10-10.

How often should you water seedlings in rockwool?

Rockwool needs more frequent watering than soil because it does not absorb water as well. It is best to water your Rockwool when the top inch or so of the material is wet, which usually happens within 24 hours. It is important to keep the surface of the material damp, but not wet. If the Rockwool dries out too much, it will crack and become brittle. If you see a rockwool plant that appears to be drying out, cut off the top few inches and let it dry out again before re-watering. Once you have cut back on the water supply, wait for the top inch or so of the material to be wet again, and then re-water. You can also use a spray bottle with a fine mist setting to apply water directly to the Rockwool.

Can I start seeds in rockwool cubes?

It would be fine as long as you keep it moist enough. I think it should be fine to use sand or even peat moss as long as it’s not very wet. As far as keeping it moist, I have a few suggestions:
1. You can put a humidifier in the room where the cubes are.
2. You can put a small fan in the room with the cubes and blow on them.
3. You can use a misting system (like a misting bottle). I’ve heard of people putting plastic bags over their plants and then cutting holes in the bags to spray water into. That way the plant doesn’t dry out.

Rockwool cubes are a great substrate for seed starters. They are safe and will provide your seed with good moisture and oxygen for optimal germination.

They come in various sizes and shapes and they can blend into different growing systems. So, give your seeds an excellent germinating chance with rockwool.

Growertoday.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of Amazon.com, Inc. or its affiliates.

SSSC’s Cannabis Seeds Germination Guide:

In this article we will try and give you an overview over the different germination methods used for cannabis seeds and then tell you our preferred way of starting SSSC-seeds. In general cannabis seeds germinate best at a warm temperature of around 21-26 degrees Celsius.
We have personally tested all the described methods in a side-by-side germination test already years ago and found them to be almost equally effective, if done correctly.
It strongly depends on the growers personal preferences (e.g. organic-grower, soil-grower, hydro-grower etc.), which method of germination is best suited for him individually. Somebody who wants to grow purely organic, will not want to use rockwool-plugs as starting media out of principle. A hydro-grower on the other hand will not want to start the seeds directly in soil, when he later continues his grow on rockwool-cubes.

The best way to germinate cannabis seeds:
a) directly in soil
b) in rockwool cubes
c) on wet paper towel

a) Germination directly in soil:

In nature a seed will start its germination on or in the ground as soon as it comes in contact with enough water. The water will permeate into the seed-shell and start the germination process inside, the small plant-embryo inside the seed will then start to grow. If it stays wet enough and does not dry out during the germination process, the plant will grow into a small seedling. As growers we want to re-create this natural process.

Therefore, the first thing to do is putting the seeds into a small glass of water and let them soak there for 24 hours.
There is special planting soil for seedlings (which is not fertilized) you can buy at any gardening shop, or you can simply use a light-mix (=soil with perlite) for cannabis (which is only slightly fertilized).
It is very important to put the seed NOT too deep into the soil when you plant it! The deeper you put it into the soil, the more the seedling has to fight to reach the surface.
The maximum depth a seed should be buried is about two times its own diameter, therefore with a cannabis seed that is about 5 mm deep!
The seed is planted with the TIP OF THE SEED POINTING DOWNWARDS into a small hole in the center of the pot and then covered with soil.
The WHITE TAP-ROOT that will grow out of the seed, WILL ALWAYS GROW OUT OF THE TIP OF SEED and then search its way downwards into the soil. Therefore it is important to put the seed into the soil in the correct position, this will ensure that your roots don’t get tangled and your plant can develop quickly.
The small pots are put under a grow-lamp (e.g. T5, LED, HPS, MH) and after 24 to 48 hours in the soil the stem of the seedling should start to show and poke out of the soil. The first set of round leaves, the so called cotyledons, will open up and the seedling can start photosynthesis and start growing.

See also  Germinating Old Marijuana Seeds

b) Germination on rockwool cubes:

Rockwool Cubes are especially designed and produced as a sterile growing medium for plants and come in different standard sizes for easy re-planting. The smallest cube-size (25-36 mm side-length) is used for the germination of seeds.
First the rockwool cubes MUST BE soaked in ph-adjusted water (ph=5,5) for 2 hours in order to get their ph-value to 6,0 (they are ALWAYS produced with a ph-value of 7,5, which is much too high for cannabis and MUST be neutralized first!) and then the excess water is drained.
Now the rockwool cubes are ready for use. They can be either be soaked again, this time in a mild nutrient solution (EC=0,3) with a ph of 6,0 or used directly.
The rockwool cubes are put into special trays, which hold 77 to 125 little cubes.
Each cube has a tiny hole on the top, which is made to hold the seed.
The seed is carefully (with a pincet) put into the tiny hole with THE TIP POINTING DOWNWARDS, in order to make sure the root grows downwards.
The tray holding the rockwool-cubes has to stay moist at all times during the germination process.
Now it takes appr. 48-72 hours under a grow-light for the seedling to appear and grow out of the top of the rockwool cube.

c) Germination on wet paper towels:

As alternative to starting your seeds inside the growing-medium (e.g. soil-, peat, rockwool) you can pre-germinate them on wet paper towels and let the white tap-root grow out of the seed-shell before you transplant the seeds into your preferred growing medium.
The seeds are put on one half of a wet paper towel, which is then folded over to cover the seeds from both sides. After all air-bubbles are carefully pressed out of the folded wet paper-towel and insuring that the seeds are completely encased inside, the paper-towel is put inside a zip-loc plastic baggy. The bag is closed and then hung up at a dark place (e.g taped to the inside of a closet-door). By hanging the seeds inside the bag instead of laying them on a plate, you ensure that the white tap-root can grow out of the seed-shell STRAIGHT and does not curl up in a circle. This will later enable you to transplant the germinated seed easier into the growing medium. After 48-72 hours inside the plastic bag and encased by the wet paper-towel the seeds will have opened up and the white tap-root should have grown out of the seedling for about 5-10 mm. Now they can be taken off the wet paper-towel with a pincet (VERY CAREFULLY without hurting the fragile white tap-root!) and planted into the growing medium with the WHITE ROOT POINTING DOWNWARDS! Since the seed has started its germination already, it does not need to be buried deep. The best way is to put it into a small hole in the soil with the seed-shell still peaking out of the soil a little bit. This way it can start to grow upwards right away and you will have a tiny plant already 24 hours after transplanting the pre-germinated seed into the soil and putting it under a grow-lamp.

Here at the SSSC we prefer to grow organic (see Karel’s ‚Bio Grow-Book‘) and therefore we prefer to germinate in soil.

Here is our little step-by-step guide to germination success in soil:

1.) Soak the seeds for 24 hours in a small glass with distilled water
2.) Fill a small pot with potting soil or light-mix
3.) Water the soil well with ph-neutral (ph=6,0) water, but make it not too wet (not soggy!)
4.) Make a small hole in the center of your pot
5.) The hole should be appr. 5 mm deep and wide (e.g. you can use your small finger)
6.) Place the seed in the center of the hole with the TIP OF THE SEED POINTING DOWNWARDS!
7.) Cover the hole with soil and carefully push the soil from all sides inwards to make sure the seed is well enclosed inside the soil
8.) Push down and compress the soil at the outside, directly at the walls of the pot, in order to make a little ring around the whole pot. This ring is for drainage while watering. It makes sure the seed does not get flushed out of the soil at the beginning and later prevents the stem from standing in water and starting to rot.
9.) Water the little pot from time to time, by pouring a little water into the ring on the outside, before the soil gets too dry. The water will be sucked towards the center of the soil right away. Try to avoid pouring water directly into the center of the pot, in order to avoid flushing out the seed per accident!

We hope you find the germination method that fits best to your growing style and wish you lots of success with your SSSC-seeds!

How useful was this post?

Click on a star to rate it!

Average rating 3 / 5. Vote count: 1

No votes so far! Be the first to rate this post.