how to grow weed cheap and fast

How to grow weed cheap and fast

Those are the bare bones of growing weed cheap! There are several other accessories you can use to help produce the best yield possible and aid with clean-up, including a watering can, fabric grow pot, saucer, and natural pest repellent. This can be an expensive toolkit to put together on your own. To save money, you can check out our Complete Grow Kits at a Pot for Pot. They have everything you need to grow and you won’t have to take care of shipping costs from multiple websites.

How to Grow Weed on a Budget

A sunny window with 4 hours of direct sun will grow a couple baggies . With full sun all day, you will send your yields through the roof. But having too much pot has never been a problem. If you live in a house that gets very little direct sunlight, you can always supplement with a natural spectrum COB LED grow light . These lights are affordable to buy, have low energy costs, and emit a natural spectrum of light that can proudly sit over your cannabis plant in the corner of your living room.

The Importance of Grow Lights for Cannabis Cultivation

But let’s talk about the most important elements – light and soil, and how nutrients can further enhance your soil.

How to grow weed cheap and fast

It doesn’t cost a small fortune to get started. Indeed, you can grow a handful of plants for under $200. The size of your yield depends on a myriad of factors. First of all, genetics plays a significant role. An Afghan auto strain, for example, could yield up to 17 ounces of bud per square meter.

If you have a grow tent, it is time to follow the setup instructions. Hang your grow light and fill your plants with the soil. We recommend switching on the lights up to 24 hours before seed germination. Keep the temperature between 70 – 85-degrees Fahrenheit during the day. The humidity level should be lowered slightly as the plant gets older. Begin with 60-70% and gradually reduce it.

The thermostat/hygrometer combination measures heat and humidity. If you allow the temperature and moisture to go out of their ideal ranges, your plants could experience problems. The timer is necessary to control the lighting in your room. It enables you to ‘set and forget.’

Overall Total Cost – $193-$203

Let’s Begin

We have also spotted several LED lights, from 300W to 600W, for under $100.

You must purchase a high-quality organic potting mix. Fortunately, standard garden-variety soil with added nutrients is more than enough. In general, two quarts is enough per one-gallon pot. You should find up to 16 quarts for approximately $20. This is ample soil for three x 2.5-gallon pots, and plenty for our small grow.

Here is a quick outline of what to expect when you grow marijuana:

It’s Time to Grow!

Another ‘tried and trusted,’ if vague, calculation is to assume you can produce a gram of marijuana per watt of light. Some autos yield up to 500 grams per square meter, which equates to 10.76 square feet. In any case, you can find 600W HPS lights for around $86 online. If money is tight, you can drop to $70 for a 150W light, though it doesn’t provide the same value. Indeed, you will get perhaps 4-5 ounces with the 150W light but 20+ with a 600W option, or 10+ if you pay for a 300W light.

Those willing to spend more money may decide to invest in a grow tent. It is a convenient location that enables you to keep the crop under control. When choosing a tent, you must also take into account the likely final height of the plants. There is a wide selection of autoflowering strains that remain below three feet in height. Examples include Rhino Ryder, Fastberry, and Grapefruit.

However, this system tends to run hot and will need the open air of a large room or garage to function optimally.

LED lights work well in this environment because they produce very little heat. Although filtration for a grow of this size is not necessary, those who wish to grow in a more confined space should consider opting for the intake fan and thermometer/hydrometer. This will help to both increase air circulation and provide some fundamental metrics for maintaining a healthy environment for the plants.

Note: Product prices below may fluctuate slightly over time.

The 4×4’ main tent is powered by a 630w CMH light and the 1×4’ two-tiered tent extension is built out with two 4-bulb t5 fluorescent light fixtures. Complete with four fans, two dual outlet timers, and adjustable intake/exhaust components, this 80” tent supports even the most ambitious of grows.

Who should use this build?

First-time growers, budget growers, and those who wish to keep their garden as inconspicuous as possible are a good fit for the Nano Grow, as it is a basic grow setup. At 24”x 24”, this tent is small enough to fit in most closets.

With this system, cool air will enter through the bottom of the tent, and warm air will be scrubbed as it leaves the top of the tent. The 6” clip-on fan should be placed just above canopy level on the back-left pole to help circulate air evenly as the plants mature.

The Standard Grow offers a complete package for growers who wish to maintain a perpetual cultivation operation year-round. It covers all of the essentials in housing, lighting, automation, and filtration for a standard home grow.

Grow room components:

The 6” exhaust kit may either be fastened on the top of the left tent or on the bottom-right, each option directing air through the carbon filter and out of the top port. This room receives two 6” clip-on fans—the first will be fastened to the top-right support beam of the tent to help move warm air towards the exhaust. The second fan can be placed on the back-left corner to follow the canopy as it rises.

With the 315w CMH (ceramic metal halide) lights, enough heat is generated to recommend this build for an open space to allow for the best possible air circulation through the tent. The included 3100k bulb allows you to use the tent for both vegetative and flowering cycles.