commercial marijuana grow building

Commercial marijuana grow building

At Mintropy, our engineers will consider the following for your craft grow facility design:

In the past, 1,000 tons of refrigeration capacity was needed for 80,000 to 10,000 square foot facilities such as a data center, hospital, or school. A grow room requires similar, but they are dramatically different. A grow room has a much higher latent load (moisture/dehumidification load). The humidity in the grow space must undergo more cooling to effectively condense the humidity off the cooling coil. A much colder chilled water temperature is needed. When growing cannabis, the lights-out mode means that growers must dry the air and then reheat it, so the grow room does not start to over-cool. The reheat can use free energy obtained from the dehumidification process when the right HVAC system is used. Having an experienced company, such as Mintropy, handle such key specifics is necessary for the success of any commercial cannabis grow facility.

Standard commercial grow room design plans does vary depending on your crop and your cultivation practices. Will you be using hydroponics or standard soil medium? Typically, indoor cannabis cultivation has at least eight spaces or more flower rooms with a standard measurement of 30 feet across and between 50 to 100 feet long. Dividing the indoor grow facilities into individual rooms allows each one to become self-contained with their own temperature controls. Needed pest treatment practices become easier. Also, the workflow is reduced to doable and digestible chunks. The cultivation facility design that consists of various rooms affords various planting and harvest times. The rooms are also easily quarantined from the rest of the facility to control any pest or mold outbreak so only a small percentage of the crop is damaged or destroyed and the entire grow operation does not perish. A standard marijuana grow facility design with room division allows you to test the efficiency of Co2 injection, factor in various types of lighting, and monitor the nutrient regime that occurs. Another room can also house the same cultivars but have them grown under different variables, so you obtain reliable data and make any needed protocol changes.

See also  medical marijuana grow room plans

HVAC of the Cannabis Grow Facility Design

The crucial component of any commercial grow op setup remains the HVAC systems used. The HVAC company will gather the needed information from the cultivation consultant and engineer so they can focus on the necessary electrical use, Co2 requirements, air circulation, purification, and moisture quantity that is forecast to be generated at the site. They will then work to create the ideal environmental settings needed for all the various stages of the marijuana or hemp growth cycles to effectively control the conditions of the indoor grow facility.

Any engineer used to create a craft grow facility should have experience with indoor plant cultivation facilities. The design of the commercial grow room will feature the necessary environmental controls, plumbing, and electrical requirements, backup power system, and typically HVAC redundancy. To achieve all of this, most will hire various engineering firms that specialize in the key areas to make the commercial grow room a success.

Within the confines of the indoor grow facility, air circulation keeps the plant’s canopy slightly swaying because of the artificial breeze. The upper flowers in a vertical grow are then prevented from getting excessively hot. Clearly, the environmental controls are of paramount importance or cannabis crop loss can occur and pests from clones can easily enter the facility if things are not kept at consistent levels. Engineering and installation are one of the biggest investments (if not the biggest) of any commercial grow room design plan. You cannot cut corners, or the financial losses quickly become insurmountable.

The Commercial Cannabis Craft Grow Industry

A craft grower is a facility that is licensed by the Department of Agriculture to cultivate, dry, cure, and package hemp or marijuana. They each have their own commercial marijuana grow room design plans but for licensing as a craft grow, they must contain at least 5,000 square feet of canopy space for the cannabis plants during the flowering stage of their life cycle. The Department of Agriculture can authorize either an increase or decrease of space for the flowering cultivation stage which occurs in increments of 3,000 square feet depending on the market need, the craft grow house design capacity, and the history of the licensee’s compliance or noncompliant issues. The maximum set forth is 14,000 square feet for cultivation when the plants enter their flowering stage. However, the commercial grow room design plan laid forth by the USDA encompasses all the growth stages of the cannabis plant which drives home the importance of them being secured and enclosed in an indoor cultivation facility design.

See also  watermelon seeds

The commercial cannabis industry is constantly changing and evolving. Without a doubt, the one crucial component of any commercial grow op setup remains the HVAC system. Standard commercial HVAC companies often lack the experience needed to provide the correct environmental conditions required by a craft grow facility.

Our solutions are built to meet your needs and your timeline. Find out how Starrco can support your upcoming project with fast, versatile, and solid solutions.

Medium and large commercial grow rooms are designed, manufactured, and delivered within weeks of placing your order. Our speed of assembly maximizes your uptime. The faster your facility is ready, the earlier you can start growing your cannabis plants.

Built for Change

Whether it is for your HVAC, office equipment, security cameras, or other appliances, we can place electrical outlets wherever you need them.

Each modular building is manufactured at our St. Louis, MO factory using accelerated production processes. The finished parts of the modular grow room are shipped to your facility for installation.

Scaling Up Your Grow Room

Jumpstart your facility’s grow room project with simple, solid modular systems. Let us know what you’re looking for, and we’ll let you know how we can help.

Commercial marijuana grow building

The most important consideration in evaluating a potential grow space is ensuring proper ventilation for your crops. Cannabis plants require a lot of light, which typically emit a tremendous amount of heat. Without proper ventilation and air exchange, producers risk cooking their crop or limiting yields due to excess humidity, heat, or oxygen. Greenhouse-specific HVAC systems exist for closed greenhouse schemes and help producers program hyper-accurate climate control systems to ensure the facility maintains ideal growth conditions.

See also  lotus larry seeds

As far as bestsellers go, there’s not a lot of strain-specific sales data available, but since most cannabis seeds are sourced from the Netherlands, it’s not difficult to find information about the best-reviewed and most popular strains.

Can I add my own grow lights and horizontal air flow fans (HAF fans), wet wall system, etc?

As far as potting each individual plant goes, allow for at least a 5 gallon pot for each cannabis plant. Cannabis roots expand very quickly and require a lot of room, therefore, smaller receptacles will result in smaller yields. Grow bags are also widely used in the cannabis production industry, placing them on a permeable table with trays or tarps to collect water runoff.

HPS Grow Lights vs. LED Grow Lights

In 2021, the difference between many strains of the same name may be night and day. Recent reports post-legalization in Washington, Oregon, and Colorado have shone a brighter light on the actual genealogy – and even the classification between indica and sativa products – that may be entirely mislabeled or incorrect at the outset.